ANTI-VIBRATION WASHING MACHINE PADS
 REDUCE NOISE & VIBRATION

These washing machine pads are just what you have been looking for to quiet that noisy, vibrating washing machine forever.  Yes, these are the very washing machine pads you may have read about lately.  They have been written up in industrial product resources, such as ThomasNet.com and appeared in press releases on the Internet.  They actually work to dampen vibration and reduce structural transmitted noise through the floor and walls where the washer is located.

These washing machine pads are sought after by:

  • Homeowners
  • Condo Owners
  • Property Managers
  • Facility Supervisors

and, anyone who has to deal with fixing this annoying problem.
 

  • Our washing machine pads have provided a cost-effective alternative to proposed major renovations to deal with noise and vibration invading living spaces.
     

  • Our washing machine pads are particularly helpful to folks who live in condos or other types of buildings where the laundry room is located on an upper floor level.

Based on the proven benefit of providing isolation and damping under the feet of machinery to reduce structurally transmitted vibration and noise, these specially designed composite mounting pads are made to fit under the existing feet of the washers & dryers.  Unlike others on the market, our washing machine pads have a circular recess that allows the washing machine foot to sit inside on granulated cork and fiber to ensure optimum performance. The profiled PVC bottom surface provides a high coefficient of friction for non slip installation.  See detailed specs.




 

Disclaimer                

Our low profile (only add 1/2 inch installed) Washing Machine Pads are available in convenient packs of four ready to be installed.  If you have concerns about the height of your side-by-side machines being equal, you might want to purchase an extra pack for your dryer.

These pads will work effectively on all types of standard machines up to 600 pounds where structural transmitted vibration and noise is a problem.  These pads are made to be used under machines that have already been leveled and are not recommended for use on soft support (i.e., plywood) floors.

 

If you need more information regarding our Washing Machine Pads, feel free to e-mail us:  Info@WashingMachinePads.com

 

These Washing Machine Pads are manufactured by:
Clark Cutler McDermott · 5 Fisher Street · Franklin, MA 02038-2114 · 800.922.3019

*Disclaimer: Clark-Cutler-McDermott Company assumes no liability for property damage or personal injury arising from the misuse of these pads. Washers and dryers fully loaded should not weigh more than 600 pounds total on one set of four pads. The machine should be level, supported on a firm floor support, and the feet fully resting on the soft, recessed center composite material to insure proper performance. Pads will not provide vibration isolation for a washer which has a severe off-set load, out of balance condition. Pads are not intended for use on non washer / dryer applications without prior approval.